LV Single Multi Core Power Cable IEC Standard CU/XLPE/PVC 150SQMM
Structure
Conductor: Copper
Insulation: XLPE
Inner sheath:PVC/LSZH
Outer sheath: PVC/LSZH
Operation characteristic
1.Rated voltage:0.6/1kV.
2.Long-term permission working temperature of cable conductor is
90℃.
3.The minimum allowable bending radius of cable is 8 times of outer
diameter of thecable.
Application
These cables are used for electricity supply in low voltage
installation system, They are suitable for installation in indoors
and outdoors, in cable ducts, under ground, in power and switching
stations, local energy distributions, industrial plants, where
there is no risk of mechanical damage.
Construction:
Conductors :Copper or Aluminium conductor, round standed or Shaped, Class 2
to IEC 60228, BS EN 60228. For smaller sizes, a solid round
conductor, Class 1 as per IEC 60228, BS EN 60228 can also be
supplied upon request.
Insulation :XLPE material and thickness shall be as per IEC 60502 or BS 5467
rated for 90°C continuous operation.
Colour Code
Colour Code (1) :
1 Core : Red or Black
2 Cores : Red, Black
3 Cores : Red, Yellow, Blue
4 Cores : Red, Yellow, Blue, Black
5 Cores : Red, Yellow, Blue, Black, Green Above
5 Cores : Black Cores with White numerals
Colour Code (2) :
1 Core : Brown or Blue
2 Cores : Brown or Blue
3 Cores : Brown, Black, Grey
4 Cores : Blue, Brown, Black, Grey
5 Cores : Green/Yellow, Blue, Brown, Black, Grey Above
5 Cores : Black Cores with White numerals
Assembly /Inner Sheath
Two, Three or Four insulated conductors are laid-up together with
non-hygroscopic
fillers and the assembly is bedded with an extruded layer of PVC.
In case of non- armoured cables, this layer may be omitted；
Armour
Aluminum/Galvanized Steel Wires applied helically over the bedding
as per IEC 60502 or as per BS 5467, BS 6346.
Single core cables shall be Aluminium wire armour.
Aluminum/Steel Tapes applied helically over the bedding of
multi-core cables
as per IEC 60502.
Outer Sheath
Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1
or Type 9 as BS 6346/5467.Special type of PVC sheathing material
such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC,
Sunlight resistant PVC, Oil Resistant PVC are available on special
request. Also, special sheathing materials such as LLDPE, MDPE,
HDPE, LSF, CPE are available on request.
Fire Performance of Cable Sheaths
Cables can be supplied with special flame retardant PVC outer
sheath to comply with the flame test requirements of IEC
60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply
cables with Low Smoke Halogen Free (LSHF) material according to
IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.
Cable Parameters:
Four cores(Galvanized steel wire armoured)
Nominal
Area | Approx Conductor Diameter | Nominal Insulation thickness | Nominal bedding thickness | Nominal Steel Wire dia. | Nominal Sheath thickness | Approx. Overall Diameter | Approx.
Weight |
| mm² | mm | mm | mm | mm | mm | mm | Kg/Km |
| 4x1.5 | 1.6 | 0.7 | 1 | 0.9 | 1.8 | 15 | 415 |
| 4x2.5 | 2 | 0.7 | 1 | 0.9 | 1.8 | 17.5 | 490 |
| 4x4 | 2.6 | 0.7 | 1 | 0.9 | 1.8 | 19 | 600 |
| 4x6 | 3.1 | 0.7 | 1 | 0.9 | 1.8 | 20 | 730 |
| 4x10 | 4 | 0.7 | 1 | 1.25 | 1.8 | 23 | 970 |
| 4x16 | 5 | 0.7 | 1 | 1.6 | 1.8 | 26 | 1520 |
| 4x25 | 6.3 | 0.9 | 1 | 1.6 | 1.8 | 29 | 2010 |
| 4x35 | 7.4 | 0.9 | 1 | 1.6 | 1.9 | 31 | 2560 |
| 4x50 | 8.8 | 1 | 1 | 1.6 | 2.1 | 36 | 3350 |
| 4x70 | 10.6 | 1.1 | 1.2 | 2 | 2.2 | 40 | 4680 |
| 4x95 | 12.4 | 1.1 | 1.2 | 2 | 2.4 | 44 | 5710 |
| 4x120 | 14 | 1.2 | 1.4 | 2.5 | 2.5 | 50 | 7500 |
| 4x150 | 15.5 | 1.4 | 1.4 | 2.5 | 2.6 | 55 | 9010 |
| 4x185 | 17.4 | 1.6 | 1.4 | 2.5 | 2.8 | 61 | 10820 |
| 4x240 | 20.3 | 1.7 | 1.6 | 2.5 | 3.1 | 69 | 13630 |
| 4x300 | 22.7 | 1.8 | 1.6 | 2.5 | 3.2 | 75 | 16820 |
| 4x400 | 25.4 | 2 | 1.8 | 3.15 | 3.4 | 83 | 22230 |
Why Choose Zhenglan Cable:
- OEM/ODM services provided;
- Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards;
Customer standard requirments Accepted;
- Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
- Registered capital of $30 million and factory covers an area of
60,000㎡;
- Advanced test equipment and procedures, 100% inspection before
factory;
- Enough stocks and the higest efficient shipping time guarranteed;
- Professional pre-sales and after-sales services provided.
